13
CLOTHES GUARD
The distance X to the clothes guard running
parallel to the wheel diameter (fig. 7) is to be
aligned to the selected wheel position.
!
Caution:
The distance X between the driving wheel
and the mudguard should be as small as
possible (approx. 1 cm). – Danger of
crushing!
Adapting the clothes guard
(Fig. 7.1 to 7.3)
– Remove drive wheel (see Drive wheels sec-
tion).
– Loosen or disassemble the attachment
screws (A and B) depending on version and
distance to the wheel.
– Adapt the mudguard to the circumference
of the wheel.
– Screw in and tighten the attachment screws
(A and B).
7.1
B
A
7
7.2
B
A
7.3
B
A
> <
X
