Meyra 1.620, Руководство по эксплуатации

Страница: 21 / 60

2
1
21
Pre-operation checks
Before the checks before initial driving,
driving readiness needs to be established.
☞
Therefore observe chapter Selecting
the operation on page 19.
Before starting to drive, the following should
be checked:
☞
the battery charging condition,
☞
the setting of the preselected final
speed.
– For this observe the operating
manual < Operating module >.
Battery charging procedure
Do not insert any objects other than the
battery charger plug into the battery
charging socket. – Danger of short circuit!
☞
For the battery charging procedure
also observe the operating manual of
the battery charger.
1. Lock the electric wheelchair.
☞
Therefore observe chapter Securing
the electric wheelchair on page 16.
2. Insert the charger plug into the battery
charging socket (1) of the operating
module.
3. Switch the battery charger on, resp.
insert the main plug of the battery
charger into the corresponding power
socket.
– The battery charging procedure is in-
itiated.
☞
The charging procedure only runs with
an intact mains/battery fuse (2)!
4. After a completed charging procedure
disconnect the battery charger from
the socket and remove the battery
charging plug from the battery charg-
ing socket.