Meyra 1.610, Руководство по техническому обслуживанию и ремонту

Страница: 36 / 104

36
FUSES
Main fuse
The main-/battery fuse is switched in line between the two
batteries and is inserted in the top left of the fuse holder of
the battery case (1).
The main fuse holder (2) is located inside the battery box at
the back.
Model 1.617
On model 1.617 electronic safety is achieved through the
circuit breaker with securing button (3).
The circuit breaker is located behind an angle, on the right
side of the back of the electronic housing (4).
Electronic security
In case if a shortage only the defective component is de-
activated. All other components (e.g. all other lights except
for the defective one) remain available. After removal of the
shortage, the affected component is automatically activat-
ed again.
Power module
All electrical components (except for the batteries) are elec-
tronically protected by the power module R-Net (5) resp.
VR2 (6). The power module also sees to a power limitation
of the motors.
Lighting module VR2
☞
(not with model 1.617)
The lighting module VR2 (7) is applied in combination with
the operating module VR2 and mounted beside the power
module (6) [8].
1
2
7
6
3
4
5
8