Meyra 1.163, Руководство по обслуживанию

Страница: 42 / 80

3
1
1
2
2
42
LIGHTING
The 12-Volt-lighting jig and the turn signal are
synchronised by the processor and guided over a
shortage proof line driver.
With the help of the curve speed sensor an auto-
matic reset of the turn signal is also achieved simul-
taneously.
☞
Note:
Model 3.264 and
Model 1.363 / 1.364:
The turn signal is reset automatically after defi-
nitely pre-set 15 impulses.
☞
Note:
If a turn-signal bulb is defective, the remaining
one blinks at double frequency.
A brake light is serially included in all vehicles with
lighting features.
It is activated for a short period when the director
is released.
Adjusting the headlights
In level stand of the vehicle the headlights are ad-
justed so that the lower edge of the light cone
reaches the ground about 3 meters in front of the
scooter.
It is adjusted by tilting the headlight (1) or through
the adjustment screw (2).
Description of the rear lighting
With reference to the model, the taillights were re-
fit with LED-technology starting October 2008 [3].