2
1
21
Push.handles
The height adjustable push handles
[1] are attached to the back support
with a clamping jig each (2) and can
be adjusted to the requirements of
the accompanying person.
Height.adjustable.push.handles
The push handles are continuously
height adjustable and secured against
pulling out.
Height. adjustment. of. the. push.
handles
– First hold onto the push handle
that is to be adjusted with one
hand, then loosen the correspond-
ing clamping lever (2) with the
other hand.
– Then lift/slide the push handle to
the desired height and afterwards
retighten the clamping lever (2).
Special. features. of. the. clamping.
lever
The clamping lever (2) can be turned
into an operation position that is com-
fortable for you.
– For this pull the lever outward, un-
til the teething is released.
– After turning the lever let the
teething engage again.