Meyer V-FORCE 7400 Series Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 88

Meyer V-FORCE 7400 Series Скачать руководство пользователя страница 28

PB-74/7500

- 28 -

LUBRICATION & ADJUSTMENT FOR 3RD AUGER

WARNING: DISCONNECT PTO DRIVE SHAFT AND HYDRAULIC HOSES (RELIEVE HYDRAULIC

PRESSURE) BEFORE CLEANING, ADJUSTING, LUBRICATING OR SERVICING THIS MACHINE. FAILURE
TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.

WEEKLY LUBRICATION (every 25-30 loads)

Grease (1) bearing supporting the front shaft

of the 3rd auger assembly. This bearing is grease line
fitted to the spreader front, bearing back plate. The
zerk is accessible by opening the front steel shielding
cover.

SEASONAL LUBRICATION

Maintain oil level in the (1) oil bath enclosure at

the top, check plug line level. Check regularly for any
observable leakage. If oil leakage is excessive, repair
with silicone. Use #80-90 wt. gear lube oil or an
equivalent. Lighter weight gear lube oil may be used in
temperatures less than 20° F. Change oil in the oil
bath enclosure after the first season of use and
regularly thereafter. (2.5 gallon capacity)
Condensation can occur. Drain out water (bottom
plug) as needed.

•

Remove lower plug for draining purposes.

•

Remove reservoir cover or level plug for filling

purpose. (Seal cover tight with silicone when re-
installing.)

ADJUSTMENTS

The 3rd auger drive roller chain (large LH top

reduction sprocket weldment to the 3rd auger)
enclosed in the oil bath is automatically tensioned by a
spring loaded idler/slide pipe. The tensioning,
extension spring should extend 3/4” from its neutral 4”
total length.

Manual adjustment for the automatic tensioning idler
assembly is located at the RF, top of the oil bath
enclosure just under the cover.

COVER

A1

L1

L2

L1

L2

A1

«
...
26
27
28
29
30
...
»

Содержание V-FORCE 7400 Series

























































































Отзывы:

Нет отзывов