Meyer V-FORCE 7400 Series Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 88

Meyer V-FORCE 7400 Series Скачать руководство пользователя страница 23

PB-74/7500

- 23 -

ADJUSTMENTS

WARNING: DISCONNECT PTO DRIVE SHAFT AND HYDRAULIC HOSES (RELIEVE HYDRAULIC

PRESSURE) BEFORE CLEANING, ADJUSTING, LUBRICATING OR SERVICING THIS SPREADER. FAILURE
TO HEED MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH.

SPINNER MATERIAL GUIDES

Regularly inspect and adjust two spinner material
guides located at both the LR and RR of the spreader.
Create a 1/8 - 3/8” clearance between material guides
and spinner teeth, figure 9. Maintain the
recommended clearances for maximum spreading
pattern. Adjust to prevent excessive manure build-up
on material guide inner surfaces. Adjust to prevent
manure chunks or foreign object lodging between
material guides and spinner teeth.

NOTE: Excessive lodging can cause premature

spinner tooth wear, “bent-over” or even
breakage.

SHEAR ARM MATERIAL GUIDE
ADJUSTMENT

Adjustment for the 1/8- 3/8” clearance of each
material guide to spinner tooth is made by loosening
the jam nut on the linkage arm and turning the linkage
arm to either move the guide in closer or out farther
from the spinner teeth. After adjustment has been
made for the 1/8- 3/8” clearance retighten the jam nut
to hold the material guide in place. Once
recommended clearance is obtained turn spinners
over by hand in the direction by which the spreader
would turn to check clearance. Do not turn in the
opposite direction as front chain tightener damage
could occur. If foreign objects enter the spinner area
the rear pivot bolt on the shear arm is designed to
shear. The 1/2-13 x 3 1/2” grade 5 replacement
machine bolts are stored under the rear shield. For
replacement install with 1/2” flat washer on top and on
bottom of block and tighten nylon locknut firmly.

FIGURE 9. MATERIAL GUIDE CLEARANCE

1/8 - 3/8”

«
...
21
22
23
24
25
...
»

Содержание V-FORCE 7400 Series

























































































Отзывы:

Нет отзывов