Meyer F585 2018 страница 27 Скачать руководство пользователя | Manualshive

Страница: 27 / 92

background image

1-800-325-9103

PB-MIXER-TR-MECH

- 27 -

www.meyermfg.com

7.0 OPERATION

7.1 GENERAL

The mixer is designed for blending dairy and beef rations. The mixer performance can vary according to the difference in
material, loading sequence, mixing speed and unloading methods. The following guidelines should be understood before
operating the mixer.

A new mixer will need an initial run-in period to polish the augers and mixer sides to achieve correct material movement
inside the mixer. Until the unit is polished inside the user may experience material spillage, dead spots, or increased
horsepower requirements. The load size may need to be reduced until the unit is polished inside.

DO NOT allow anyone to operate, service, inspect or otherwise
handle this mixer until all operators have read and understand all of
the instructional materials in this Operator’s And Parts Manual and
have been properly trained in its intended usage.

Before operating the mixer, look in all directions and make sure no
bystanders, especially small children are in the work area.

Do not climb or step onto the platform or ladder before the parking
brake has been applied.

Turn on level ground. Slow down when turning.

Go up and down slopes, not across them.

Keep the heavy end of the machine uphill.

Do not overload the machine.

Check for adequate traction.

Always operate at the rated PTO speed but DO NOT EXCEED THE
RATED PTO SPEED. If the mixer is operated faster than the rated PTO
speed the strain on the drive train and mixer is greatly increased.

Do not force hay into the auger with loader or any other device.

Be aware of the overall size of the mixer to allow clearance through
doorways.

If any component fails, shut off all power to the mixer and move the
mixer to a safe work area. Repair or replace damaged components
before proceeding with unloading of the mix.

«
...
25
26
27
28
29
...
»

Содержание F585 2018





























































































Отзывы:

Нет отзывов

Похожие инструкции для F585 2018

Бренд: Teac Страницы: 22

Бренд: Valcom Страницы: 6

Бренд: WAHL James Martin Страницы: 12

Бренд: König Electronic Страницы: 46

Бренд: Biamp Страницы: 3

Бренд: Mackie Страницы: 36

Бренд: ARDES Страницы: 31

Бренд: PITSOS Страницы: 10

Бренд: Maono Страницы: 8

Бренд: ATIKA Страницы: 104

Бренд: Fimar Страницы: 38

SmartMixer AT-MX351

Бренд: Audio Technica Страницы: 16

Бренд: Univex Страницы: 8

Бренд: Rami Страницы: 28

Бренд: Ecler essentials Страницы: 15

POWERSELECT CHM-3

Бренд: Cuisinart Страницы: 16

Бренд: Cuisinart Страницы: 37

Бренд: Melissa Страницы: 28

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды