Meyer F585 2018 страница 21 Скачать руководство пользователя | Manualshive

Страница: 21 / 92

background image

1-800-325-9103

PB-MIXER-TR-MECH

- 21 -

www.meyermfg.com

6.0 PRE-OPERATION

6.1 STATIC INSPECTION

Before operating the mixer for the first time and each time thereafter, check the following items:

1.

Check that all safety signs are in good and legible condition.

2.

Inspect the mixer for proper adjustments.

(See 8.2 ADJUSTMENTS)

3.

Lubricate the equipment. (See 8.1 LUBRICATION)

4.

Make sure that all guards and shields are in place, secured and functioning as designed.

5.

Check condition of all hydraulic components for leaks and electrical cords and cables for wear. Repair or replace as
required.

6.

Check the hydraulic and gear box oil level. (See 8.1 LUBRICATION)

7.

Check for and remove any foreign objects in the mixing chamber and discharge opening.

8.

Be sure that there are no tools laying on or in the mixer.

9.

Verify that all electrical and hydraulic connections are tight and secure before operating.

DO NOT allow anyone to operate, service, inspect or otherwise
handle this equipment until all operators have read and understand
all of the instructional materials in this Operator’s And Parts Manual
and have been properly trained in its intended usage.

Verify that the equipment is securely fastened to the truck.

Verify that all electrical / hydraulic connections and bolts / hardware
are tight and securely fastened before operating the equipment.

Always keep all shields and guards in place and securely fastened.

Keep hands, feet and clothing away.

Wear safety glasses to prevent eye injury when any of the following
conditions exist:

•

When fluids are under pressure.

•

Flying debris or loose material is present.

•

Tools are being used.

Failure to heed may result in serious personal injury or death.

Hydraulic fluid escaping under pressure can have sufficient force to
cause injury. Keep all hoses and connections in good serviceable
condition. Failure to heed could result in serious personal injury or
death.

Keep all electrical cords and cables in good serviceable condition.
Failure to heed could result in serious personal injury or death.

Check that all gear cases and oil bath enclosures contain oil and
that bearings and joints have been greased. (See maintenance
section).

«
...
19
20
21
22
23
...
»

Содержание F585 2018





























































































Отзывы:

Нет отзывов

Похожие инструкции для F585 2018

Бренд: Radio Shack Страницы: 2

Бренд: Hear Technologies Страницы: 2

Бренд: Gastrodomus Страницы: 37

Бренд: Hottek Страницы: 28

Бренд: MMM Страницы: 30

Бренд: IVIE Страницы: 8

Бренд: MIKA Страницы: 7

Бренд: Rane Страницы: 4

Бренд: Black & Decker Страницы: 2

PERFORMANCE HELIX MX610 Series

Бренд: Black & Decker Страницы: 2

Perormance Helix MX610B

Бренд: Black & Decker Страницы: 2

PowerPro MX78WS

Бренд: Black & Decker Страницы: 2

Бренд: Black & Decker Страницы: 2

PERFORMANCE MX600 Series

Бренд: Black & Decker Страницы: 2

Бренд: Black & Decker Страницы: 8

Бренд: Kenwood Страницы: 2

Бренд: Kenwood Страницы: 12

Бренд: Kenwood Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды