manualshive.com logo in svg

Meyer F585 2018, Руководство владельца/оператора

Поделиться
Скачать
Meyer F585 2018 Скачать руководство пользователя страница 13

1-800-325-9103

PB-MIXER-TR-MECH

- 13 -

 www.meyermfg.com

5.0  SAFETY

Meyer Mfg. Corp. equipment is manufactured with operator safety in mind. Located on the equipment are various safety
signs to aid in operation and warn of hazardous areas. Pay close attention to all safety signs on the equipment.

Carefully follow the operating and maintenance instructions in this manual and all applicable safety laws. Failure to follow
all safety procedures may result in serious injury or death.

Before attempting to operate this equipment, read and study the following safety information. In addition, make
sure that every individual who operates or works with the equipment, whether family member or employee, is
familiar with these safety precautions.

Meyer Mfg. Corp. provides guards for exposed moving parts for the operator’s protection; however, some areas
cannot be guarded or shielded in order to assure proper operation. The operator’s manual and safety signs on
the equipment itself warn you of hazards and must be read and observed closely!

Danger, Warning, Caution, and instructional decals and plates are placed on the equipment to protect anyone working on
or around this equipment, as well as the components of the equipment. All personnel operating or maintaining this
equipment must familiarize themselves with all Danger, Warning, Caution, and instructional decals and plates.

This symbol is used to call attention to instructions
concerning personal safety. Be sure to observe and
follow these instructions. Take time to be careful!

The signal word DANGER on the machine and in the manual identifies
a hazardous situation which, if not avoided, WILL result in death or
serious injury.

The signal word WARNING on the machine and in the manual
indicates a potentially hazardous situation which, if not avoided,
COULD result in death or serious injury.

The signal word CAUTION on the machine and in the manual indicates
a potentially hazardous situation which, if not avoided, MAY result in
minor or moderate injury. It may also be used to alert against unsafe
practices.

This notice identifies procedures which must be followed to avoid
damage to the machine.

Содержание F585 2018





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды