2
According to ISO/IEC Guide and EN 45014
The product herewith complies with the requirements
of the Low Voltage Directive 73/23/EEC and the
EMC Directive 89/336/EEC.
declares that the product:
The Manufacturer:
Product Name
:
PSW-2
Product Options
:
All
Name
:
Meyer Sound Laboratories
Address
:
2832 San Pablo Avenue
Berkeley, California 94702-2204, USA
conforms to the following Product Specifications:
Safety
:
EN 60065: 1994
EMC
:
EN 55022: 1987 - Class A
IEC 801-2: 1984 - 8 kV
IEC 801-3: 1984 - 3 V/m
IEC 801-4: 1984 - 0.5 kV Signal Lines,
Made by Meyer Sound, Berkeley, CA, USA
European Office:
Meyer Sound Germany
GmbH
Carl Zeiss Strasse 13
56751 Polch, Germany
U
ULL
C
C
U
ULL
®
®
LISTED
3K59
COMMERCIAL
AUDIO SYSTEM
Declaration of Conformity
Office of Quality Manager
Berkeley, California USA
October 1, 1995
Shock
:
30 g 11 msec half-sine
on each of 6 sides
Vibration
:
10 – 55 Hz (0.010 m
peak-to-peak excursion)
Operating temperature
:
0
°
C to +45
°
C
Nonoperating temp
:
< –40
°
C or > +75
°
C
Humidity
:
to 95% at 35
°
C
Operating altitude
:
to 4600 m (15,000 ft)
Nonoperating altitude
:
to 6300 m (25,000 ft)
Environmental Specifications for
Meyer Sound Electronics Products
1.0 kV Power Lines
!
Pour indiquer les risques
résultant de tensions
dangereuses
Zu die gefahren von
gefährliche spanning zeigen
Important operating
instructions
Pour indequer important
instructions
Frame or chassis
Masse, châssis
Rahmen oder chassis
Protective earth ground
Terre de protection
Die schutzerde
Para indicar azares provengo
de peligroso voltajes
Para indicar importante
funcionar y mantenimiento
instrucciones
Armadura o chassis
Tierra proteccionista
These symbols indicate important safety or operating features in this booklet and on the chassis.
Dangerous voltages:
risk of electric shock
Symbols Used
Zu wichtige betriebs-
anweisung und unter-
haltsanweisung zeigen
Contents
Introduction .......................................................... 3
AC Power .............................................................. 3
Audio Input ........................................................... 5
Amplification and Protection Circuitry ............... 5
Rigging .................................................................. 7
Configuration, Placement, and Polarity .............. 7
Measurement and System Integration Tools ....... 8
Full-Range Systems ................................................ 8
Driver Troubleshooting ......................................... 10
Safety Summary .................................................... 11
Controls and Connectors ...................................... 12
Dimensions ............................................................ 12
