Metronix 9200-4104-2000, Инструкция по монтажу

Страница: 86 / 95

7 Storage/transport
7 Storage/transport
The following requirements must be fulfilled for the storage and transport of the servo
drive:
Storage
l
Store the servo drive in line with the specified storage temperatures. Use only its
original packaging.
l
After approximately six months of storage, the oxide layer of the capacitors may
become damaged. This is why the servo drive must be supplied with power for
approximately 1 hour every six months (24 V and 230 V) in order to preserve the
oxide layer.
Transport
Risk of injury due to improper transport
Follow these instructions to ensure the safe transport of the servo drive and to avoid
injuries.
l
Use only qualified personnel for the transport of the servo drive.
l
Transport the servo drive only in its original packaging.
l
Use only suitable transport equipment.
l
Use suitable personal protective equipment.
l
If you notice that the packaging is damaged, notify the carrier without delay. Then,
inspect the servo drive for any signs of external or internal damage.
Transport damage
Dangerous electrical voltage!
Transport damage to the servo drive may compromise the insulation between the low-
voltage part and the high-voltage part. This results in an extremely dangerous electrical
voltage. Do not use the servo drive in this case. The servo drive needs to be checked by
the sales partner or manufacturer.
In case of external damage (dents, deformed mounting flange, etc.) it must be presumed
that some of the components have come loose and the breakdown strength concerning
the high-voltage part may no longer be existent.
Mounting Instructions BL 4000-M and BL 4000-D Page 86 of 95