Metronic DL7 Series Скачать руководство пользователя страница 52

Страница: 52 / 71

DL7, DL7L

[1]: The slider enables setting the screen brightness level during the operation from 21 to

100%.

[2]: It enables selection of the screen saver brightness level after the define idle time. User

can choose two screen saver levels: 0% (the screen goes black) and 20%.

[3]: The slider situated in this field enables setting the idle time after the elapse of which

the screen goes black.

14.1.3 Date & Time

Time field

Enables the setting of time in the hour/minute/second format. The changes are made

using the three sliders. The current parametres are marked in red. After the change of
settings, confirm the selected options by clicking on the

SET

button.

Date field

Enables to set the date in the day/month/year format. Using the arrows in the top part of

the field, set the relevant month and year, and then in the field below, the day of week which
after selecting will be marked in red. After the change of settings, confirm the selected
options by clicking on the

SET

button

After the confirmation of changes, the data will be changed immediately
without rebooting the device.

14.1.4 Service

The maintenance tab is only available to the administrator and enables the performance

of the following tasks:



Reset

– results in restart of the device



Restore the manufacturer settings

– Using the function will result in deleting all

of the earlier settings. The archive files created so far will not be deleted.

14.2 Input and output settings

Having selected a suitable measurement card slot from the list, it is possible to

programme the individual inputs and outputs of the module. You can use six tabs to do this
each of which corresponds to the consecutive input/output.

The programming options for the individual modules:



DL7-IN6I / DL7-IN6I(24V)

Mode: Disabled

(0-20 mA, 4-20mA, Disabled)

[1]

Adjustment:

[value] mA

[2]

[1]: It enables setting the working mode of a particular measurement input to receive

standard signals from the current loop 0-20 mA or 4-20 mA.

[2]: It enables adjustment of the measurement result from a particular input by a positive or

negative value by the user.

Содержание DL7 Series








































































Результаты поиска

Содержание DL7 Series

Отзывы:

Metronic DL7 Series, Руководство пользователя, Страница: 52 / 71

Результаты поиска

Содержание DL7 Series

Отзывы: