DL7, DL7L
46
Clicking on the pictogram highlight a suitable sub-screen.
!
Using the Main menu screen any changes to the device settings can be
made. Having made and accepted the changes, click any icon on the side
Menu. It will display a message requesting you to confirm the changes.
Having approved them, the device will switch off and reboot with the new
settings.
12.6 Single result window
The window displays all the data concerning a selected measurement channel. Using
the arrows from the side menu, a change of the displayed channels is possible. Keeping the
keys down for a few seconds enables automatic display of other channels.
Fig. 12.8 Model Single result screen.
In the top part of the screen, there is a channel description made by the user. Below,
the current value measured by the channel is displayed together with the unit declared by
the user.
The bottom part of the screen is further sub-divided into two parts. The left part displays
the counter values together with the units and the minimum and maximum. Clicking on the
counter field allows to zero the counters marked as erasable and resting the max. and min.
values.
