DL7, DL7L
64
Sound for buttons: Enabled
(Disabled, Enabled)
[4]
Sound for new alarms: Enabled
(Disabled, Enabled)
[5]
Changing DST: Enabled
(Disabled, Enabled)
[6]
[1]: Selection from the drop down list.
[2]: Enables to insert any description (name) of the device.
[3]: Device ID enables to assign an individual ID number. The ID is also included in archive
files names.
!
When using more recorders it is recommended to assign individual ID to each
one. It will allow to recognize the archive source by ID in the file name.
[4]: Turns on/off the button sound.
[5]: Turns on/off the sound for new alarms.
[6]:
Turns on/off the automatic change of time into the summer time and back.
12.1.2 Display
Backlight Brightness
[1]
Backlight Dimmed Level: 20%
(0%, 20%)
[2]
Dimmed after
[3]
[1]: Setting screen brightness level during the operation from 21 to 100% (using slider).
[2]: Selection of the screensaver brightness level after the define idle time. User can
choose two screen saver levels: 0% (the screen goes black) and 20%.
[3]: Setting the idle time after the elapse of which the screen goes dimmed (using slider);
for
0 min
- the screen will not be dimmed.
12.1.3 Date & Time
Time field
Enables the setting of time in the hour/minute/second format. The changes are made
using the three sliders. The current parameters are marked in red. After the change of
settings, confirm the selected options by clicking on the
SET
button (below).
For the Administrator login level, it is possible to add a clock adjustment. The correction
is made in seconds per week (s/week). The correction must be an integer. The
correction must be selected individually for each device. If it is noticed that the device
clock is running late, enter a positive value of the seconds of clock being late converted
to the weekly value. For example, if it is noticed that the device clock is 3 s/day late,
then the correction 21 s/week should be entered (3*7 = 21). If it is noticed that the device
clock is accelerating, enter a negative value of the clock acceleration converted to the
weekly value. For example, if it is noticed that the device clock is 3 s/day late, then the
correction -21 s/week should be entered (-3*7 = -21).
Date field
Enables setting the date in the day/month/year format. Setting the date is enabled by
using the ‘calendar card’. Using the arrows in the top part of the field, set the relevant
month and year, and then in the field below, the day of month, which after selecting will
be marked with a rectangle filled with red color. The current date is marked in a blue
frame. After the change of settings, confirm the selected options by clicking on the
SET
button (below).
