METRON QA-1290, Руководство пользователя и обслуживания, Страница: 14 / 65

2.4 Ansur plug in QA-1290
Ansur for the QA-1290 is a front-end test automation and presenta-
tion tool for METRON's QA-1290 NIBP Analyzer. It allows you to
conduct the same tests, but by remote control via an IBM-compatible
PC/XT with MS Windows (Version 98 or later). Additionally, the
program has additional features to automate and enhance your testing
program.
Each of the QA-1290 tests can be run independently from Ansur.
Results are shown on the PC screen during testing, and the user is
prompted to set the tested equipment accordingly. At the conclusion
of tests, the user may print a report, store the test and results on disk,
or both. Combinations of tests can be created and stored as “Test
Templates.” The program maintains a library of these sequences. In
this way you can store and retrieve sequences that are appropriate for
each kind of equipment being tested at your facility.
NOTE
Ansur QA-1290 has its own
user manual which contains all
the information concerning the
program. If you order a demon-
stration version of the program
you also receive the manual.
Sequences can then be used independently, or can be attached to a
checklist, written procedure, and equipment data in the form of a test
“Protocol.” The equipment data can be entered manually into the pro-
tocol, or it may be retrieved by Ansur from equipment database man-
agement programs, such as METRON’s QA-MAP, WOSYST or
other equipment files. Protocols can be created easily for each item of
equipment in your inventory, and stored for use. Test protocols with
results can be printed, or stored on disk, and the results of testing can
be sent back to the equipment database to close a work order and up-
date the service history.
2-4