Metrohm NIRS XDS RapidContent, Руководство пользователя, Страница: 19 / 50

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Installation
￭￭￭￭￭￭￭￭
11
3.5 Connecting the network cable
In order to control the NIRS XDS RapidContent Analyzer, it is connected to
a computer either directly or via a local network (LAN). Use the supplied
crossover network cable for connecting the instrument directly to a com-
puter's network card.
For a connection via your local network, you need a network cable.
As network configurations vary considerably across different companies, a
full discussion is not possible in this manual. We recommend that you
have your network specialist establish the connection between the instru-
ment and the company network.
NOTICE
Direct connection to computer
When directly connecting the measuring instrument to a computer, no
other network card for connection to a local network may be installed
at the same time.
This leads to communication errors and disruptions.
￭
In network operation, connect the measuring instrument via the net-
work as well.
3.6 Switching on the instrument
Use the switch at the rear to switch on the instrument.
Figure 5 On/off switch