Metrohm 892 Professional Rancimat Скачать руководство пользователя страница 50

Страница: 50 / 63

5.1 General notes

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

￭￭￭￭￭￭￭￭

892 Professional Rancimat

5.1.3

Cleaning the instrument

WARNING

Danger of poisoning and chemical burns from chemical hazard-
ous substances

Poisoning and/or chemical burns through contact with aggressive
chemical substances.

￭

Only use detergents that do not cause any unwanted side reactions
with the materials to be cleaned.

￭

Clean contaminated surfaces.

￭

Wear protective equipment.

￭

Use exhaust equipment when working with vaporizing hazardous
substances.

￭

Dispose of chemically contaminated materials (e.g. cleaning mate-
rial) properly.

WARNING

Electric shock from electrical potential

Risk of injury by touching live components or through moisture on live
parts.

￭

Never open the housing of the instrument.

￭

Protect live parts (e.g. power supply unit, power cord, connection
sockets) from moisture.

￭

If you suspect that moisture has gotten into the instrument, discon-
nect the instrument from the energy supply. Then, notify Metrohm
Service.

￭

Only personnel who have been issued Metrohm qualification may
perform service and repair work on electric and electronic parts.

Cleaning the surfaces of the product

Prerequisites

￭

The product is disconnected from the power grid.

Clean the surfaces with a damp cloth.

Содержание 892 Professional Rancimat
































































Результаты поиска

Содержание 892 Professional Rancimat

Отзывы:

Бренды по названию

Популярные бренды

Metrohm 892 Professional Rancimat, Руководство пользователя

Результаты поиска

Содержание 892 Professional Rancimat

Отзывы:

Бренды по названию

Популярные бренды