Metrohm 863, Руководство пользователя

Страница: 46 / 78

5.4 Performing a sample series
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
38
￭￭￭￭￭￭￭￭
863 Compact Autosampler
5.4.1 Starting the sample series
Starting a sample series
A suitable method must be loaded before a sample series is started (see
chapter 5.3.4, page 36) . The necessary parameters ) can then be modi-
fied.
1 Define the sample series
Press the [START] key.
You can now enter the quantity and the first rack position of the
samples to be processed.
2 Enter the number of samples
￭
Select Number of samples and press [OK] .
￭
Enter the number of samples. If the methods to be started via
remote connection are used, the maximum value for the number
of samples (99) can be entered here.
￭
Close the input dialog with [BACK] or Accept .
3 Enter the rack position of the first sample
￭
Select Next sample pos. and press [OK] .
￭
Enter the starting position of the sample series.
￭
Close the input dialog with [BACK] or Accept .
The value for the number of samples remains saved for the next sam-
ple series. The position of the first sample is increased with each
method run.
You can still cancel the start of the sample series at this time with
[BACK] or [STOP] .
4 Close the sample series dialog
Close the dialog with the [BACK] key.