manualshive.com logo in svg

Metrohm 863, Руководство пользователя

Поделиться
Скачать
Metrohm 863 Скачать руководство пользователя страница 10

1.2 About the documentation

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

2

￭￭￭￭￭￭￭￭

863 Compact Autosampler

1.1.4 

Stand-alone operation

The 863 Compact Autosampler can be used as a central control instru-
ment in an automation system which can include various types of ion
chromatography instruments or the 797 VA Computrace. In this role, the
863 Compact Autosampler acts as a reliable sample changer.

Specified method runs can be individually parameterized and saved as
sample-specific methods. Methods can be exported on a USB flash drive
and then copied onto another instrument quickly and easily.

1.1.5 

Intended use

The 863 Compact Autosampler is designed for usage as an automation
system in analytical laboratories. It is 

not

 suitable for usage in biochemi-

cal, biological or medical environments in its basic equipment version.

1.2 

About the documentation

CAUTION

Please read through this documentation carefully before putting the
instrument into operation. The documentation contains information
and warnings which the user must follow in order to ensure safe opera-
tion of the instrument.

1.2.1 

Symbols and conventions

The following symbols and formatting may appear in this documentation:

Cross-reference to figure legend

The first number refers to the figure number, the sec-
ond to the instrument part in the figure.

Instruction step

Carry out these steps in the sequence shown.

Method

Dialog text

, 

parameter

 in the software

File 

▶

 New

Menu or menu item

[Next]

Button

 or 

key

WARNING

This symbol draws attention to a possible life-threat-
ening hazard or risk of injury.

Содержание 863















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды