Metrohm 830, Инструкция по эксплуатации, Страница: 11 / 51

1.3 Information on the Instructions for Use
1.3.2 Notation and pictograms
The following notations and pictograms (symbols) are used in these In-
structions for Use:
Range
Menu item, parameter or entry
value
in
«
IC Net
»
program
SYSTEM STATE
Program window
in
«
IC Net
»
program
<OK>
Button
in
«
IC Net
»
program
4 Part or control of 830
Danger/Warning
This symbol indicates a possible
risk of death or injury to the user
and possible damage to the
instrument or its components by
electricity.
Danger/Warning
This symbol indicates a possible
risk of death or injury to the user
and possible damage to the
instrument or its components.
Attention
This symbol indicates important
information that you should read
before continuing.
Information
This symbol indicates additional
information and tips which may be
of particular use to you.
830 IC Interface / 8.830.1003 Instructions for Use
5