Metrohm 2.899.0010, Руководство - Краткие инструкции

Страница: 55 / 62

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Operation
899 Coulometer
￭￭￭￭￭￭￭￭
49
5 Displaying the live dialog
￭
Select the menu item Live dialog in the main menu and press
[OK] .
or
￭
Press [BACK] in the main dialog.
The live dialog is displayed once again.
Editing the sample data of the running determination
When you use the sample table, the editing of the sample data of the run-
ning determination proceeds as described in
chapter 5.9.1, page 47 . In
addition, you have the option of editing these in the sample table. The
first line always contains the sample data of the running determination.
Simply select for this purpose the
Sample table (see "Editing the sample
table", page 48) menu item in the main menu.
5.9.3 Editing the live parameters
Certain method parameters can be edited while a determination is being
carried out. The only parameters that can be modified are those that can
be selected. Nevertheless, all of the parameters are visible. The modified
parameters are taken into account at once. If, for example, you increase
the parameter
Extraction time while the extraction time is still running,
then the new value will be taken into account at once. If however you
change this parameter after the extraction time has already expired, then
the changed value will not be taken into account until the next determina-
tion.
Proceed as follows to edit the parameters:
1 Displaying the main dialog
￭
Press [BACK] .
The main dialog is displayed. The determination continues to run in
the background.
2 Opening the main menu
￭
Select Menu and press [OK] .