Metrodata ATM CBR DSU, Руководство пользователя

Страница: 53 / 128

CONFIGURING THE ATM CBR DSU
43 76-02-031E
The ALARM EVENT LOG records alarms that have arisen since the last cold start. They are
recorded simply as MAJOR or MINOR alarms with ON or OFF status.
Figure 5.27 Alarn event log
5 . 8. 1 Config event log
The CONFIG EVENT LOG records any configuration changes on the system. This can be
very useful since configuration actions may have been taken remotely, without the
knowledge of the local user of a node
Figure 5.28 Config event log
5 . 8. 2 Performance data
This option gives you access to the ATM CBR DSUs performance monitoring functions.
These are described in detail in Section 6. The
PERFORMANCE DATA menus are below:
Figure 5.29 Performance data menus
and will be one of two types, depending upon whether the interface has a PLCP layer or not.
--- Alarm Event Log ---
17/2/2002 08:20:23 Major ON E3
16/2/2002 13:21:00 Major OFF E3
16/2/2002 12:52:38 Minor ON SDH/Sonet
Press any key to continue
--- Config Event Log ---
16/11/2001 08:20:23 Config updated
16/01/2002 13:21:00 Config updated
Press any key to continue
PERFORMANCE
DATA
PERFORMANCE
DATA
Interface DS3 Interface SDH/Sonet
Display mode Static summary Display mode Updated summary
Summary style Counts Summary style G.821
Phys layer stats <display> Phys layer stats FEBE errs
Error type FEBE errors Error type Frame errs
pLcp stats <display> ATM layer stats <display>
error Type Frame errs Clear all data
ATM layer stats <display>
Clear all data