METRObility Optical Systems R821-1S, Инструкция по установке и эксплуатации

Страница: 75 / 127

73
CLI Commands
trative name. Multi-word strings must be placed in
quotation marks. If unspecified, the default value is
NULL.
location name – a case-sensitive ASCII string (up to 50
characters in length) denoting the assigned adminis-
trative location. Multi-word strings must be placed in
quotation marks. If unspecified, the default value is
NULL.
contact – a case-sensitive ASCII string (up to 50
characters in length) denoting the contact name.
Multi-word strings must be placed in quotation
marks. If unspecified, the default value is NULL.
Example :
Console> set systeminformation admin name “A B” location 45
Console>
set trapcontrol
Description : Set trap handling for a specified trap on a per destination
basis.
Syntax : set trapcontrol <trap index> host <IP address> state
<disable | enable>
Parameters : trap index – trap number as defined in MIB-II.
IP address – trap destination host’s IP address in dotted
decimal notation.
state – enable or disable the specified trap.
Example : Console> set trapcontrol 4 host 192.168.1.100 state enable
Console>
set
trapdestination
Description : Set the destination and protocol information for a trap
destination host. Up to four trap destinations may be
configured.
Syntax : set trapdestination <IP address> [port <UDP port>]
[version <SNMP version>] [community <trap community>]
[username <SNMP security name>]
Parameters : IP address – trap destination’s IP address in dotted
decimal notation.
UDP port – UDP transport port number in the range 1 to
65535. The default value is 162 for SNMP, and 9162
for management via NetBeacon.
SNMP version – SNMP version number: 1, 2, or 3. The
default value is 1.
trap community – a case-sensitive ASCII string (up to 32
characters in length) denoting the receive profile on
the trap destination host. The default value is public.
SNMP security name – a case-sensitive ASCII string (up to
32 characters in length) denoting the user name for
SNMPv3 traps. The username is a required field for