Metric Halo 3d Upgrade Board Set, Руководство пользователя

Страница: 96 / 527

2882 Quick Start Guide
96
Figure 4.7: Monitor Controller
Below the Source selection buttons is the speaker and volume level control/display. Since the 2882
does not have digitally-controlled analog gain stages like the LIO8 and ULN8, the default setting
for the 2882 is line level out (i.e.: no signal attenuation).
The new 3d Monitor Controller is a vast upgrade to previous versions with its own dedicated DSP
processing path and supports all channel configurations from Mono through Dolby Atmos™ 7.1.4.
There is a wealth of knowledge in the Monitor Controller section on how to set up and use the
Monitor Controller.
The Monitor Controller window can be hidden by toggling the “ m ” key. Hold the Option key to
engage scroll wheel/two finger scroll control of Monitor Level control. Option-Click returns controls
to the default setting.
6. Below the Monitor Controller is the Cue Controls window. This window will expand downwards as
you add more Cue Sends.
You can think of Cues as named sends to physical outputs; they provide advanced routing controls
to allow you feed them with the MC source, dedicated busses (for cue mixes) and with a talkback
or listen back signal.
The Cues give you top level control of the physical output level for each Cue. The controllable
routing logic allows you to easily control the source and level of the signals routed to the cues which
allows you to use them as a monitoring console for live monitoring and/or as part of a send system
for bus output routing.
By default, there will be one Cue that mults the selected input in the MC and routes to the Head-
phones of the root box. This mults the selected MC source to both the Monitor output and head-
phones. You can think of this Cue as your Control Room headphones.