Metric Halo 3d Upgrade Board Set, Руководство пользователя

Страница: 306 / 527

Monitor and Cue Controllers
306
Figure 11.12: Default Monitor Controller and Cue Control windows
By default, MIOConsole3d will create a Monitor Controller for your domain. If you don't want to use the
monitor controller, you can just delete the Monitor Output to return Analog outputs 1+2 to manual control.
Important note:
The Monitor Controller Source Selector is always in-line, routing audio to the various Cue Con-
troller Listenback and MC Source feeds. So even if you re-assign your Monitor Controller out-
puts for other purposes, the MC Source path is still in the Cues loop. This lets you use keystroke
commands and outboard EuCon or MCP control surfaces to select Cue sources with the Mon-
itor Controller hidden.
Monitor Controller default configuration
At the top of the Monitor Controller window are the MC Sources. In the default configuration, each bus
from the default mixer is available as a Source.
• Hold the mouse cursor over the blue “Mon Out” button at the bottom of the MC. A tooltip will
appear, showing the current (default) setting for your Monitor Output: Box #1, Analog outputs 1
and 2.
Figure 11.13: Monitor Controller Output tooltip
The default Monitor Controller output destination will always be to analog channels 1 and 2 of the
3d box connected directly to your host computer (i.e.: the “root” box, which is always designated
as box #1). In the case of a ULN-2, which has a discrete stereo monitor output stage built-in, the
default routing tooltip will show “#1 Monitor L/R”.