Metric Halo 3d Upgrade Board Set Скачать руководство пользователя

Страница: 213 / 527

The MIOConsole3d Application

213

Session: Export menu

Figure 10.32: Session: Export menu

•

Export Tracks…

is a high-speed file-level command which exports each track as a single soundfile,

starting at timeline 00:00:00.00 through the end of the last segment in the Session, such that all

exported soundfiles start at 00:00:00.00 and are of the same duration.

Empty space in each track will be at digital zero. Edits, fades, segment gains and any summing of

track lanes will be executed per-track and included in the exported file.

Real-time mix desk processing is not applied to Exported soundfiles.

Think of ‘Export Tracks’ as a track consolidation process, designed to make all files in a Session easily

transportable to a third-party DAW or archive media.

•

Export Tracks Between Loop Points…

is similar to “Export Tracks”, but exports the audio only from

the Loop Start point to the Loop End point.

•

Export Selection…

is similar to “Export Tracks”, but exports the audio only from the selected tracks

within the duration set by current timeline range or segment Selection.

All Session Export functions follow the same rules as Export Tracks, where each exported Track file in the

Export will be of uniform length (with digital zeros padding any empty spaces) and edits and segment-level

processing executed per-track.

When selecting an “Export…” function, a dialog will open asking you to select a destination folder for the

export. Upon creating or selecting the destination folder, the export will do its thing and open the folder

containing the newly-exported files.

Session: Transport menu

Figure 10.33: Session: Transport menu

• The

Start Recording

(default:

⌥⌘R

) command is available whenever one or more MIOConsole3d

mixer strips are Record Enabled (i.e.: the Record Enable button is RED).

If the Session Record Trigger mode is set to ‘Manual’,

Start Recording

will start recording immedi-

ately, including audio already captured in the preroll buffer.

Содержание 3d Upgrade Board Set















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды

Metric Halo 3d Upgrade Board Set, Руководство пользователя

Результаты поиска

Содержание 3d Upgrade Board Set

Отзывы:

Похожие инструкции для 3d Upgrade Board Set

Бренды по названию

Популярные бренды