MI 3155
Eurotest
XD
Appendix F
– Programming of AutoSequences
on Metrel ES Manager
235
F.6
Creating / modifying an Auto Sequence®
If creating a new Auto
Sequence® from scratch, the first step (Header) and the last step
(Result) are offered by default. Measurement steps are inserted by the user.
Options
Adding a measurement step
By double clicking on a Single test a new
measurement step will appear as the last of
measurement steps. It can also be dragged and
dropped on the appropriate position in the Auto
Sequence®.
Adding flow commands
Selected flow command can be dragged from the list
of Flow Commands and dropped on the appropriate
place in any Auto
Sequence® step.
Changing position of flow command
within measurement step
By a click on an element and use of
and
keys.
Viewing / changing parameters of
flow commands or single tests.
By a double click on the element.
Setting number of measurement
step repetitions.
By setting a number in the
field.
Touch pre-test disable / enable
(not available in all functions)
By setting True / False in the
field.
(Default value is False
– Touch pre-test is enabled)
Right click on the selected measurement step / flow command:
Copy
– Paste before
A measurement step / flow command can be
copied and pasted above selected location on
the same or on another Auto
Sequence®.
Copy
– Paste after
A measurement step / flow command can be
copied and pasted under selected location on
the same or on another Auto
Sequence®.
Delete
Deletes the selected measurement step / flow
command.
