manualshive.com logo in svg

METREL AlphaPAT, Инструкция по эксплуатации

Поделиться
Скачать
METREL AlphaPAT Скачать руководство пользователя страница 38

MI 2142 AlphaPAT                                                                                  Autotest modes 

 

38 

7.4.4  Substitute leakage current measurement 

 

Notes: 

 

Consider the warnings on the display before starting measurement!  

 

For class II appliances the test probe is used! 

 
The autotest sequence stops when substitute leakage current measurement is 
performed. The following actions can be taken to continue or complete autotest 
sequence: 
 
F1 key....................... proceed to the next substitute leakage current measurement (in 

continuous measurement mode only) 

F2 key....................... repeat the substitute leakage current measurement 
START key ............... proceed to the next autotest sequence measurement 
ESC key.................... end autotest sequence without saving autotest results 
 

7.4.5  Leakage current and apparent power measurement 

 

Notes: 

 

If any of the earth bond resistance, insulation resistance, or substitute leakage 
current measurements have failed in autotest sequence, the leakage current 
measurement is prohibited! 

 

Consider the displayed warnings before starting or proceeding with 
measurements!  

 
The autotest sequence stops after the leakage current measurement is performed. The 
following actions can be taken to continue or complete autotest sequence: 
 
F1 key....................... proceed with the next leakage current measurement (in 

continuous measurement mode only) 

F2 key....................... repeat the leakage current measurement 
START key ............... proceed to the next autotest sequence measurement 
ESC key.................... end autotest sequence without saving autotest results 
 

7.4.6  Touch leakage current measurement 

 

Notes: 

 

Consider the warnings on the display before starting measurement!  

 

If any of earth bond resistance, insulation resistance, substitute leakage current 
or leakage current measurements have failed or were skipped in selected 
autotest sequence, the touch leakage current measurement is prohibited! 

 
The autotest sequence stops after performing touch leakage current measurement. The 
following actions can be taken to continue or complete autotest sequence: 
 
F1 key....................... proceed to the next touch leakage current measurement (in 

continuous measurement mode only) 

F2 key....................... repeat the touch leakage current measurement 
START key ............... proceed to the next autotest sequence measurement 
ESC key.................... end autotest sequence without saving autotest results 

Содержание AlphaPAT

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды