MI 2142 AlphaPAT Autotest modes
35
The existing name of the selected custom procedure is shown in
Save
field. The custom
autotest sequence can be saved under the same name or renamed.
By using and cursor keys select
Save as
option in order to add a new autotest
custom sequence to the list.
After autotest name is entered press ENTER key for confirmation.
Up to 8 alphanumeric characters can be entered in both
Save
and
Save as
fields.
7.2.3 How to delete an existing custom test sequence from the list
In
Autotest custom menu
select the test sequence you want to delete by using and
cursor keys. Press CLR key on alphanumeric keypad. Confirm delete by ENTER key.
The selected autotest sequence will be deleted from the list.
Note:
If only one custom autotest is defined it cannot be deleted from the list!
7.2.4 How to start custom autotest sequence
In
Autotest custom menu
select the test sequence you want to execute by using
and cursor keys. By pressing START key the selected autotest sequence is started.
Refer to chapter
7.4 Performing autotest sequence
for more information.
7.3 Autotest TAG menu
Autotest sequence and measurement results can be entered in the AlphaPAT
instrument by using RFID TAGs together with RFID reader/writer. To use RFID system
connect RFID reader/writer to DB-9 female BAR./PRINTER/TAG connector first.
Connecting RFID reader/writer to the AlphaPAT instrument
The following can be done with data stored in RFID TAGs:
viewing autotest results,
viewing autotest sequence,
saving autotest sequence and results to instrument memory,
storing autotest sequence and results back to the RFID TAG,
pre-programming empty RFID TAGs.
To enter into
Autotest RFID TAG menu
use and cursor keys to select
Autotest
TAG
in
Main menu
and press ENTER key. The following menu is displayed:
