background image

METRA.  The World’s best kits.

metraonline.com

1-800-221-0932

© COPYRIGHT 2004-2013  METRA ELECTRONICS CORPORATION

 

REV

. 2/12/2014   INST95-5819

CAUTION: Metra recommends disconnecting the  

negative battery terminal before beginning any 

installation. All accessories, switches, and especially 

air bag indicator lights must be plugged in before 
reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the 

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 95-5819

• A) Double DIN radio housing • B) Double DIN brackets

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness:

• 70-5520 - Ford 2003-up

Antenna Adapter:

• 40-CR10 - Chrysler 2002-up

• Cutting tool • Phillips screwdriver 
• Socket wrench

TOOLS REQUIRED

A

B

• Double DIN radio provision

KIT FEATURES

Ford F-150 2009-up

 

(only XL models without plus package)

95-5819

Содержание Ford F-150 2009-up

Страница 1: ...n before reconnecting the battery or cycling the ignition NOTE Refer to the instructions included with the aftermarket radio INSTALLATION INSTRUCTIONS FOR PART 95 5819 A Double DIN radio housing B Double DIN brackets KIT COMPONENTS WIRING ANTENNA CONNECTIONS sold separately Wiring Harness 70 5520 Ford 2003 up Antenna Adapter 40 CR10 Chrysler 2002 up Cutting tool Phillips screwdriver Socket wrench ...

Страница 2: ...the cigarette lighter then remove the 1 9 32 screw exposed Figure A 2 Remove the rubber pad at the top of the radio trim panel then remove the 2 9 32 screws exposed Figure B 3 Remove 4 10 mm hex head screws securing the factory radio Unplug wiring and remove radio Continue on next page Ford F 150 2009 up only XL models without plus package Figure B Figure A 95 5819 Dash Disassembly 95 5819 ...

Страница 3: ...up only XL models without plus package 1 Slide the appropriate side bracket over the mounting legs of the double DIN trim plate aligning the holes in the trim plate and the bracket and rotate inward Note The notch in the housing should be on top Figure A 2 Slide the double DIN radio into the bracket radio housing assembly and secure the double DIN radio to the assembly using the screws supplied wi...

Страница 4: ...ps toward a better tomorrow Metra recommends MECP certified technicians INSTALLATION INSTRUCTIONS FOR PART 95 5819 3 Cut and remove half of the top 2 mounting legs with the brackets attached Figure C 4 Locate the factory wiring harness in the dash Metra recommends using the proper mating adapter from Metra or AXXESS Re connect the negative battery terminal and test the unit for proper operation 5 ...

Отзывы: