manualshive.com logo in svg

Metra Electronics DP-3021B, Инструкция по установке, Страница: 1 / 5

Поделиться
Скачать
Metra Electronics DP-3021B Скачать руководство пользователя страница 1

INSTALLATION INSTRUCTIONS FOR PART DP-3021B

METRA – The World’s best kits.

®

CAUTION!

 

 All accessories, switches, climate controls panels, 

and especially air bag indicator lights must be connected before 
cycling the ignition. Also, do not remove the factory radio with 
the key in the on position, or while the vehicle is running.

 

• ISO DDIN radio provision

•

Painted black to match the factory dash

• A) Radio dash panel • B) Radio brackets • C) Drill template • D) (4) #8 x 1/2” Phillips truss-head screws

KIT FEATURES

KIT COMPONENTS

• Panel removal tool • Phillips screwdriver
• Metal cutting tool • 10mm socket wrench
• 9/32” socket wrench • T-15 Torx screwdriver
• 1/8” drill bit

TOOLS REQUIRED

Chevrolet Corvette  1997-2004

DP-3021B

Table of Contents

A

B

C

D

Dash Disassembly

 ..............................................2-3

Kit Preparation

 ....................................................... 4

Kit Assembly

 .......................................................... 5

WIRING & ANTENNA CONNECTIONS 

(sold separately)

Wiring Harness: • XSVI-2004-NAV   Antenna Adapter: 40-GM10

Содержание DP-3021B






Отзывы:

Нет отзывов