User manual
HDMI
HDBaseT KVM Extender
2
.
Connections
Disclaimer
The product name and brand name may be registered trademark of
related manufacturers.TM and ® may be omitted on the user manual.
The pictures on the user manual are just for reference, and there may
be some slight difference with the real products.
We reserve the rights to make changes without further notice to a
product or system described herein to improve reliability, function or
design.
·
Specification
Power supply
DC12V/2A x1pcs
Items
Specifications
HDMI signal
Support HDMI2.0 HDCP2.2, support CEC and 24bits deep color
Resolution
Supported
480i/480P/576i/576P/720P/1080i/1080P/3D/3840×2160
Audio
LPCM、DTS Digital, Dolby Digital
Network cable CAT6
、
CAT6A
、
CAT7
Transmission
length
Power
consumption
TX:
＜
6W; RX:
＜
8W
Product
dimension
109.49(L)x87.0(W)x23.4(H)mm
Weight
TX:240g RX:240g
Color
Black
CAT6A
70m
70m
70m
CAT6
CAT7
Working
temperature
0
～5
5
℃
Storage
temperature
-10～70℃
H
umidity
0～90%(no condensation)
Material
1080p@60Hz, 1080p@60Hz 3D,
3840×2160@60Hz
Iron
alloy
material
60Hz
［
NOTE
］
:
It
is
recommended
to
power
from
the
receiver
unit
HDMI input
HDMI input
HDMI output
USB
USB
HDMI display
keyboard
/
mouse
Power
3
.
Bi-directional IR pass back
1
) It supports bi-directional IR pass back. User can control DVD at RX
end and control TV at TX end.
2
) If control at RX end, please connect IR blaster extension cable with
IR OUT of TX and connect IR receiver extension cable with IR IN of
RX. If control at TX end, please connect IR receiver extension cable
with IR IN of TX and connect IR blaster extension cable with IR OUT
of RX.
IR control
Support 20~60kHz wide frequency devices and Bi-directional IR
transmission
·
Installation Procedures
1
.
To make a Cat6/6A/7 network cable
Follow the standard of IEEE-568B:
·
FAQ
Q: No output on screen?
A: 1 ) Firstly, please check and make sure the power supply is connected
well. Then, check and make sure all cables are connected correctly.
2 )Please check and make sure the right HDMI input port of the
TV/ screen has been chosen.
3 )Please check and make sure there is HDMI signal to be fed into
transmitter unit, and check and make sure the receiver unit has
been connected well with the display device.
Q: Data transmission indicator flashes and no output?
A: Check and make sure the HDMI display device has been switched to
the right HDMI input channel.
Q: Connection indicator keeps off?
A: Check whether the TX
’
s HDMI IN has signal input and make sure RX
’
s
OUT is well connected with HDMI display.
Q: Output image with snow point?
A: Change the HDMI cable between the transmitter unit and the source
device, it will be better to use a shorter HDMI cable for re-testing.
HOME THEATER GROUP
866.839.9187
460 Walker Street, Holly Hill, FL 32117
www.MetraHomeTheater.com
CS-HDBTP2UKA-70
HOME THEATER GROUP
