manualshive.com logo in svg

Metra Electronics 99-7627HG, Руководство по установке, Страница: 1 / 10

Поделиться
Скачать
Metra Electronics 99-7627HG Скачать руководство пользователя страница 1

Wiring Harness: • Included with kit    Antenna Adapter: • 40-NI12

 

CAUTION: Metra recommends disconnecting the negative battery 

terminal before beginning any installation, unless the vehicle 

manufacturer recommends against so. Please check with your 

local Dealership for more information. All accessories, switches, 

climate controls panels, and especially air bag indicator lights 

must be connected before reconnecting the battery or cycling 

the ignition. Also, do not remove the factory radio with the key 

in the on position, or the vehicle running. It would be best to 

remove the key from the ignition and then wait a few seconds 

before removing the factory radio.

Installation instructions for part 99-7627HG

• ISO 

DIN radio provision

 with pocket

• ISO DDIN radio provision

•

Painted to match factory components

• A) Radio trim panel with climate controls • B) Radio brackets • (C) Keypad assembly • D) Pocket  

• E) (4) #8 x 3/8” Phillips screws • F) (2) White panel clips • Axxess interface and harness (not shown)

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS

 (sold separately)

• Panel removal tool • Phillips screwdriver

• T-20 Torx driver

TOOLS REQUIRED

Nissan Pathfinder 2013-up

(with color screen)

99-7627HG

A

D

C

E

F

B

Содержание 99-7627HG











Отзывы:

Нет отзывов