Metkon FORCIPOL 1V, Руководство по эксплуатации и инструкция, Страница: 7 / 28

7
B. INSTALLATION & SET UP
1. Unpacking & Checking Contents of Package
Carefully unpack and check contents of the package. If any components are missing or damaged,
save the packing list and materials and advise the carrier and Metkon Instruments Ltd. of the
discrepancy.
Carefully unpack and check that the following items have been received:
o
Power Cable, 1.8 mt, 1 piece
o
Drain Hose, 1.5 mt, 1 piece
o
Water Inlet Hose, 1.5 mt, 1 piece
o
Pneumatic Fitting, 8 mm to ¼”, 1 piece
o
Brass adapter, ¼” to ½”, 1 piece
o
Hose Clamp, Ø22 to Ø36 mm, 1 piece
WARNING! The FORCIPOLs weighs from 29 kgs to 40 kgs. please be sure that there are
enough people (at least 2) to safely lift the unit from the shipping carton. It is recommended
to wear safety shoes during transportation. Follow the steps on
1.1 which the unpacking
procedure is described step by step with photos.
ATTENTION! The FORCIPOLs are bolted to a wood base for protection during shipping. Lift
the unit out of the carton and position it on a table so it overhangs on the edge. Remove the
bolt securing the unit to the wood base.
Carefully remove outer packing material. Refer to the packing documents for a list of items supplied.