Metkon FORCIPOL 1V, Руководство по эксплуатации и инструкция, Страница: 6 / 28

6
2. Technical Data
No. Of
Discs
Motor
Discs
Speed
rpm
Discs Size
mm
Dimens.
mm
Weight
kg.
FORCIPOL 1V Single
0.75HP,220V-
50Hz, 1 ph
50-600
Var.
200, 250 380x690x340 30
FORCIPOL 300-1V Single
1,0 HP,220V-
50Hz, 1 ph
50-600
Var.
300 420x730x350 37
FORCIPOL 2V Double
0.75HP,220V-
50Hz, 1 ph
50-600
var.
200, 250 700x690x340 40
3. Warranty
The FORCIPOL is guaranteed against defective material or workmanship for a period of 12 months from
the date of receipt by the customer or latest 18 months after the shipping date. Warranty is not valid if
inspection shows evidence of misuse or unauthorized repair. Warranty covers only replacement of
defective materials. In case this unit must be returned to our factory for warranty service please ask for
prior authorization and include the following details: Serial Number of the unit, Invoice number and
date. Transport costs belong to the customer.
4. Safety Precautions
Read the below instructions carefully before use.

Place the machine on a sturdy and safe table.

The equipment must be installed in compliance with local safety regulations.

Only use approved METKON accessories and consumables to achieve max. safety and
lifetime.

Follow the instructions and safety regulations when lifting and carrying the equipment.

Be sure that the water connections are assembled properly without any water leakage.

Be sure that the water outlet hose is safely assembled to the outlet connection.

Make sure that the grinding and polishing discs are correctly assembled and the pins on the
face plate are engaged with the grinding disc.

While grinding manually be careful not to touch the grinding disc.

Do not try to collect a specimen from the working area while the disc is turning.

Disconnect the electrical connection before servicing the equipment.

Follow the periodically maintenance.
The equipment is designed to be used with METKON accessories and consumables. In
case of misuse of equipment, improper installation, alteration, use of different source
parts, improper repair, METKON will accept NO responsibility for any damages to the
operator or the equipment. Disassembling of any part should always be performed by
a qualified technician.