Do not use any
shap objects to
clean nozzles
Clean filter washer
periodicallly
MAKU SATINJET SLIDE RAIL SHOWER
INSTALLATION GUIDE
TECHNICAL SPECIFICATIONS
Operating Pressure:
Min 35 kPa, Max 500 kPa.
Recommended installation of a pressure
limiting valve if supply exceeds 500kPa.
Operating Temperature:
Max 70°C.
NB: New Zealand Building Code Clause G12 -
Water Supplies specifies all outlets used
primarily for personal hygiene shall deliver
water at a safe temperature.
Inlet Connections:
All ½" BSP.
Issue A
436932
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to
www.methven.com
or call
Customer Service
New Zealand
0800 804 222
Australia
1300 638 483
UK
0800 195 1602
To clean the chrome-plated surface use a soft
cloth, soap and warm water. Never use cleaning
agents that contain a corrosive acid or a scouring
additive.
CLEANING
Water contains lime which remains on the
surface after the water has evaporated. These
lime deposits can be prevented from forming by
wiping immediately after use.
NOTES:
1) Low and unequal systems:
Removal of the flow restrictor with pliers may be
necessary to optimise flow performance in low or
unequal pressure systems only. Flow restrictor is
lodged firmly in the end of the handset.
