TECHNICAL SPECIFICATIONS
Suitable for mains pressure only
Operating Pressure:
Min. 150 kPa, Max. 1000 kPa.
Recommended 150-500kPa.
Install a pressure limiting valve if supply
exceeds 1000kPa.
Operating Temperature:
Recommended 50°C at the mixer.
Max 80°C .
Inlet Connections:
All ½" BSP.
KIRI WALL MOUNTED SINGLE LEVER MIXER
INSTALLATION GUIDE
Flow limiting adjustment
1.5mm
Allen key
Mix temperature limiting adjustment
-
+
Remove half-dome (if attached)
-
+
Ceramic Cartridge Adjustment
Do not remove the ceramic cartridge from the body assembly while carrying out the
following adjustments. Note, the cartridge is factory set for maximum temperature.
Methven warrants this product against manufacturing defects and that it is suitable for use
under the operating conditions specified in this instruction sheet.
For your warranty please refer to
www.methven.com
or call
Customer Service
New Zealand
0800 804 222
Australia
1300 638 483
USA
1800 975 5409
UK
0800 195 1602
Issue B
433181
