JULY 2011
MA017157
Kaha Shower Mixer with Diverter
01-7157
IMPORTANT
Please read all of the instructions before installation
Installation Guide
Ceramic Cartridge Adjustment
Do not remove the ceramic cartridge from the body assembly while carrying out the
following adjustments. Note, the cartridge is factory set for maximum temperature.
-
+
-
+
1.5mm Hex key
Do not hydrostatic test the installation with this mixer installed. Damage to the
ceramic cartridge may occur.
“In situ” testing
WMKA21005
Methven Australia Pty Ltd
ABN 15 104 813 390
Melbourne, Australia
www.methven.com
www.methven.com
Use of this product is recommended for domestic and commercial applications.
All pipework must be thoroughly flushed prior to the installation of the mixer.
Inline filter washers must be installed on both hot and cold supplies to prevent
foreign particles damaging the ceramic cartridge.
Do not remove the ceramic cartridge from the mixer when installing.
Methven recommends a licensed plumber carry out all installations in compliance
with the requirements of AS/NZS 3500. This product complies with AS/NZS 3718
regulations.