Methven Australia Pty Ltd
ABN 15 104 813 390
Melbourne, Australia
www.methven.com
www.methven.com
JUNE 2011
MA017003
Kaha Swivel Basin Mixer
01-7003
Use of this product in non-domestic applications voids warranty.
All pipe work must be thoroughly flushed prior to the installation of the mixer.
NEFA inline filters must be installed on both hot and cold supplies.
Do not remove the ceramic cartridge from the mixer when installing.
Damage caused by hydrostatic testing is not covered by our warranty.
IMPORTANT
Please read all of the instructions before installation
Installation Guide
Illustration may not reflect actual product shape.
SPEC 001
Stream shaper
O-ring (remove if fitting
base ring)
Mounting stud
Mounting gasket
Mounting plate
Mounting nut
Flexible inlet hose:
cold
hot
Outlet
Position studs
at right angle
to outlet
The maximum working pressure of the ceramic cartridge is 1000kPa. Do not
hydrostatic test the installation with this mixer installed. Damage to the ceramic
cartridge may occur, voiding our warranty.
“In situ” testing
C
M
Y
CM
MY
CY
CMY
K
01-0011 Kaha Basin Mixer.pdf 1 16/05/11 10:06 AM
