meteocontrol blue'Log X series, Руководство по эксплуатации

Страница: 43 / 124

blue’Log X series 41 | 120
7.17 FTP push
With this function, measurement data can be sent not only to meteocontrol's
safer’Sun Professiona l and VCOM portals but also to an independent FTP server.
1. Navigate to the "PV system" area via the top navigation bar.
2. Navigate to the "Online portal" area via the left-hand navigation menu and click on
"Push service".
 If you would like to send your measurement data to an independent FTP server
in addition to the meteocontrol Internet portal, set the radio button on this page
to "Active" and make the following server settings:

FTP server name (example: ftp.meteocontrol.de)

FTP port (default

21)
 Upload directory (The directory must exist on the server – it will not
be created by the blue’Log data logger)

User name (User name for the FTP server)
 Password (User password for the FTP server)

The data will then be sent as a file in XML format to the FTP server set. The
transmission interval is set to once per day at midnight local time.
Optionally it is possible of acquiring the license "FTP Push Intraday X series" to increase
the frequency of data sending. With the license "FTP Push Intraday X series" the
following interval settings are available:

60 minutes | 15 minutes | 5 minutes
Please also note chapter 9.1 FTP PUSH INTRADAY.