IFC Networking—Serial Interface Board (SIB-NET) 5
You must have either IFC-2020-NET-0 or IFC-1010-NET-0 firmware
installed in the system for the FN connection. The IFC-2020-NET
firmware kit contains:
x
1 SIB-NET firmware chip
x
10 LIB firmware chips
x
1 CPU-2020 firmware chip
x
1 DIA-2020 firmware chip
The IFC-1010-NET firmware kit contains:
x
1 SIB-NET firmware chip
x
2 LIB-200 firmware chips
x
1 CPU-2 firmware chip
x
1 DIA-1010 firmware chip
All IFC panels on the FN must contain the same group of FN software.
Improper system operation will result if all of the firmware chips on the
IFC panel circuit boards are not part of the same firmware group.
!
WARNING:
Some software part numbers are incompatible with
others. Improper mixing of software part numbers
can compromise Life Safety functions. If you are
unsure about the compatibility of a particular
software combination, consult the Firmware Group
Chart file on the Johnson Controls intranet site
called The Advisor
the replacement for the
Johnson Controls BBS. To access this file, select
the Library section, then the Fire and Security
page, then the Firmware Group Chart file.
Software
Requirements
