Metasys IFC-1010, Раздел программирования технического руководства

Страница: 6 / 104

6 Programming—IFC-1010/2020 Programming
At the top of each submenu in this programming guide, a string of keys
illustrates the sequence of keys you press to reach a particular menu.
For example:
Prog
!
1
????
Level 2 Password
Or
Selecting Programming Mode Select Partial Point
Programming.
Select Message option to
change custom user label.
&
7
intro1
Figure 1: Sample Key Sequence to Access a Menu
Access to menu levels one and two require entry of specific passwords.
These levels allow an authorized programmer to initialize or alter the
programming of the IFC-1010/2020. Level One and Level Two entry
requirements are defined as follows:
●
Alter Status Level One password required.
●
Programming Level Two password required.
If the main operator of the system requires access to a function that is
password protected, contact the local Johnson Controls office that installed
the system for the required passwords. The IFC-2020 and IFC-1010 are
shipped with initial Level One and Level Two passwords of five zeroes
(00000).
Note: Unacknowledged points must be acknowledged prior to being
reprogrammed.
The Backspace key serves several purposes.
Backspace
Backspace
Figure 2: Backspace Key
At a menu prompt, the Backspace key aborts the selection of that option:
ENTER 40 CHARACTER USER LABEL:
When entering data, the Backspace key erases the last character or digit
entered:
ENTER 40 CHARACTER USER LABEL: JOHNSON CONTROLS
Menus
Passwords
Backspace Key