Metasys IFC-1010, Раздел программирования технического руководства

Страница: 29 / 104

Programming—IFC-1010/2020 Programming 29
Table 4: Extended Local Mode Categories and Software Type IDs
1 2 3 4 5 6 7 8 9 A B
PHOT MTRB SPSU WAT CON TPND TELE APND WFS SSC PWRC
ION MPAG SUPR SPKR GPND PAGE EVGA WFC
THER NOA FORC GTC GAS
MON SARM CMXS TRS GAC
PULL SSYM CMXC TRC
FTHR SACM FRCM DACT
WAT SEQM
SCON
Category Description
NONA 1 If any of the participating standard initiating devices in Category 1 become active, then at
a minimum, all participating standard control/notification devices in Category 5 are
activated (other standard control/notification devices may activate as a side effect of
standard initiating device activation.)
FPHT
2
These initiating devices are never acted on by Local mode and have no side effects for
other devices.
MPUL
3
If these initiating devices become active, Type ID SSC activate.
IOND 4 If these initiating devices become active, Type IDs WFS and WFC activate.
IONH 5 If any of the participating standard initiating devices in Category 1 become active, then all
participating standard control/notification devices in Category 5 become active.
IONL 6 During Local mode these standard control/notification devices are always active.
CMBO
7
These standard control/notification devices activate if they participate in Local mode.
8 These standard control/notification devices activate if any participating or nonparticipating
alarm input is active.
9 These standard control/notification devices activate if any initiating module with Type ID
WAT is active.
A These standard control/notification devices activate if any initiating module with Type ID
SPSU or SUPR is active.
B
These devices deactivate temporarily upon system reset to remove power to conventional
devices allowing them to reset.
NFPA Listing allows the programmer to change the operation of the panel
based on the NFPA Listings selected. Each listing automatically programs
one or more mandatory modules.
Table 5: NFPA Listings
N17
Listing Software ID Address
NFPA 72-1993 (72A) Local Fire Alarm Systems * EVGA L1M96
NFPA 72-1993 (72B) Auxiliary Fire Alarm Systems
GAS L1M97
NFPA 72-1993 (72C) Remote Station Fire Alarm Systems ** GAC
GAC L1M98
L1M99
NFPA 72-1993 (72D) Proprietary Fire Alarm Systems **
N/A N/A
NFPA 72-1993 (71) Central Station Fire Alarm Systems ** N/A N/A
Receiving Unit (RCV) and Central Station Unit
N/A N/A
* Fire alarm input devices automatically default to latching operation when the 72A Listing is selected.
** NFPA 72-1993(72C), (72D), and (71) are no longer required and should not be selected during programming.
NFPA Listings