METALSUB XRE 700 Скачать руководство пользователя страница 1

In accordance with American Miliary Standard MIL-A-8625-E type 3 class 2.  Also the coating is impregnated with Teflon.

Technical 

 XRE 700 

information

Metalsub® Nederland, 2009                                           Rights reserved for technical changes

 

®

  

                          

Nederland

Manual

METALSUB - HANDLAMP

   

XRE 700

09

 

 

 

 

 

 

 

 
Material 

Aluminium, anodised, Teflon coated * 

Size (d x l) 

52 mm x 240 mm 

Weight above water 

550 gram 

Weight under water 

250 gram 

Hyperbaric pressure test 

25 Bar 

Standard light power 

12 Watt LED 

Reflector 

Angle 10 

°

 (spot) 

 

 

Battery pack 

Li-Mangan 7,2 Volt – 2,6 Ah 

Capacity at 100% power 
Capacity at 33% power 

Appr. 110 minutes 
Appr. 250 minutes 

(temperature 20 

°

C) 

 

 

 

Securities 

- mechanical thermal protection 60

 

°

 

C

   

  - overpressure valve for any battery gas leakage  
  - lock button on switch 
   

Electronic circuit 

Variable light power 0-33-100% 

  Deep discharging protection  
  SOS-signal  

Battery capacity indication
- Beacon signal - one short flash per second
- Strobe signal - four short flashes per second
- S.O.S. signal - 3x short, 3x long, 3x short flashes

 

 
 
 
 

Charger 

MP500  (standard)  

  External charging by two charging plugs   

Standard and only suitable for XRE700

  Automatic switch to pulse charging

 

  charge time  5 hour 

Standard supplied with AUS/EURO/USA/UK mains plugs

 

General:

- After each dive, rinse the dive light under running water to remove all traces of dirt, sand and salt.
- Dry the charging sockets after each dive, we suggest blowing in air with an airgun or straight from the cylinder.
- Avoid physical impact.
- The metalsub XRE700 is designed for use as underwater lighting application. 
  When used above water we recommend to use the light only in dim position to avoid overheating.

Warranty

The Metalsub torch warranty will start on the date of purchase. The warranty period is 24 months and will only 
count when the torch has been used in the way the manufacturer advises and has explained in the outlines. 
During this warranty period we will repair all problems that are caused by manufacture related mistakes. 
We will take no responsibility for damage that is done through misuse or normal wear and tear of the Metalsub dive 
light for whatever reason. There is no warranty on the o-rings. The warranty period of the battery pack is 12 months 
from purchase date. Until 36 months from purchase we offer a fair settlement.
We will give no warranty when any person has carried out any repair or rebuilding on our products by themselves!
All goods being returned for warranty must be returned prepaid, sufficiently packed under the owners risk to your 
Metalsub dealer.

Отзывы: