Metalfire ULTIME D MF 1050-50 WHE 2SL, Инструкция по установке и руководство пользователя

Страница: 25 / 32

ULTD_WHE_2S3S_01 25
14 Fuel
This fireplace is suitable for burning wood. The humidity level of the wood should be no more than
15% for good combustion. If this not the case, the fireplace window will rapidly become dirty, the
heat of the fire will be significantly lower and the chimney will become clogged more quickly, which
increases the risk of chimney fire.
To reach this humidity level, the wood must be dried in a dry and ventilated place for at least 2 to 3
years. Logs, for example from beech, oak or birch trees, are the most suitable fuel.
The logs should ideally be 30 to 33 cm in length and have a maximum circumference of 15 cm. The
maximum number of these logs in the fireplace at any one time should be 3 logs. The total weight of
the 3 logs together should be about 3.5 kg (± 1.16 kg per block).
Using resinous wood types is strongly discouraged because they spark and have a short burning time.
Resinous wood types can cause a chimney fire. Using chipboard, laminated or treated wood or
combustible waste is not permitted for environmental reasons and because of the damage it does to
the fireplace. Burning this kind of wood will also cause the fireplace window to become dirty faster.
DO NOT USE SPIRITS, PETROL, OIL OR OTHER FIRE ACCELERANTS