Metabo LB 18 LTX BL, Оригинальное руководство пользователя

Страница: 12 / 76

ENGLISH en
12
Allow to cool before storage. Remove the battery
pack from the machine for storage. Store in a dry
place out of the reach of children.
Use only original Metabo or CAS (Cordless Alliance
System) battery packs and accessories.
Use only accessories that fulfil the requirements
and specifications listed in these operating
instructions.
A Battery packs with different capacities. Buy
battery packs only with voltage suitable for your
power tool.
Order no.: 625367000 4.0 Ah (LiHD)
Order no.: 625368000 5.5 Ah (LiHD)
Order no.: 625369000 8.0 Ah (LiHD)
etc.
Order no.: 625596000 2.0 Ah (Li-Ion)
Order no.: 625591000 4.0 Ah (Li-Ion)
Order no.: 625592000 5.2 Ah (Li-Ion)
etc.
B Chargers: ASC 55, ASC 145, etc.
For a complete range of accessories, see
www.metabo.com or the catalogue.
Repairs to electrical tools must only be carried
out by qualified electricians and only with
original spare parts!
Contact your local Metabo representative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
www.metabo.com.
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs may not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
Only for EU countries: never dispose of
power tools in your household waste!
According to European Directive 2012/19/EU
on Waste from Electric and Electronic Equipment
and implementation in national law, used power
tools must be collected separately and recycled in
an environmentally-friendly manner.
Discharge the battery pack in the power tool before
disposal. Prevent the contacts from short-circuiting
(e.g. by protecting them with adhesive tape).
Explanatory notes on the specifications on page 3.
Subject to change in accordance with technical
progress.
U
=Battery pack voltage
n
0
=Idle speed
V
air
=Air speed
v
air,max
=Max. air speed
m =Weight with smallest battery pack
Permitted ambient temperature during operation:
-20 °C to 50 °C (limited performance with
temperatures below 0 °C). Permitted ambient
temperature for storage: 0 °C to 30 °C
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 50636-2-100:
a
h
= vibration emission value
K
h
= uncertainty (vibration)
Typical A-weighted sound levels:
L
pa
= Sound-pressure level
L
WA
= Acoustic power level
K
pA
, K
WA/WA(G
= Uncertainty
L
WA(G)
= Guaranteed acoustic power level as
per 2000/14/EC
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
Measured values determined in conformity with
EN 50636-2-100.
9. Storage
10. Accessories
11. Repairs
12. Environmental Protection
13. Technical Specifications