12
English
2. Battery
Charger
Model
UC18YFSL
Input power source
Single phase: AC 120 V 60 Hz
Charging time
(At a temperature of 68°F (20°C))
BSL36B18: Approx. 120 min
Charging voltage
DC 14.4–18 V
Charging current
DC 3.5 A
Weight
1.1 lbs. (0.5 kg)
NOTE:
The charging time may vary according to temperature and power source voltage.
3. AC/DC
Adapter
Model
ET36A
Input power source
Single phase: AC 120 V 60 Hz
Output voltage
36V
Operating temperature range
14°F (-10°C)–104°F (40°C)
Weight
Adapter : 1.8 lbs. (0.8 kg)
Box : 2.6 lbs. (1.2 kg)
○
Overheat protection
This protection feature cuts o
ff
the power to the motor
and stops the power tool in the event of overheating
of motor during operation.
When the overheat protection feature has been
activated, the motor may stop.
In this case, release the tool switch and cool it down
in a few minutes.
After that you can use it again.
○
Restart prevention function
When the power is still switched on, the tool will not
restart when a battery is installed. This function can
be canceled once the tool is switched o
ff
.
Electric control
○
Braking Function
Brake is activated when the switch is turned o
ff
,
stopping the motor’s rotation.
○
Full speed at all times in the range up to rated load
○
Soft-start
○
Variable speed
○
Overload protection
This protection feature cuts o
ff
the power to the motor
in the event of overloading of motor or a conspicuous
reduction in rotational speed during operation.
When the overload protection feature has been
activated, the motor may stop.
In this case, release the tool switch and eliminate
causes of overloading.
After that you can use it again.
00Book̲SB3608DA̲metabo.indb 12
00Book̲SB3608DA̲metabo.indb 12
2022/08/02 23:45:55
2022/08/02 23:45:55