Messtechnik Sachs Irinos IR, Руководство пользователя

Страница: 128 / 214

128
Irinos IR Users Manual © 2015 - 2016 Messtechnik Sachs GmbH, Germany
Measurement / Control via MscDll
Steps for "closing the
connection to the MscDll"
o
The function
MSC_Stop
stops the data exchange to the Irinos-
System.
o
The function
MSC_CloseDevice
closes the connection to the Irinos-
System.
8.7 Static measurement
If only dynamic measurement data is required, there is theoretically
no need to start static measurement. However, in reality static
measurement is always started, e.g. for a live view of the
measurement values while a
dynamic measurement is active. The
following figure shows the required steps for starting a static
measurement:
133