Color (IR) Dome Camera
User Manual
ZEIM-4000622G 418,437 A.5
1. Package Contents
Color (IR) Dome Camera
x1
User Manual
x1
Guide Pattern
x2
Monitor Out Cable
x1
Plastic Anchor
x3
Self-Tapping Screw (TP4x31)
x3
Torx Wrench
x1
2. Part Names
1. BNC Video Connector
2. Power Connector
3. Tele/Wide Control
4. Near/Far Control
5. OSD Joystick
6. Monitor Out Connector
3. Installing the Camera
3.1 Disassembling the Camera
Before you mount and adjust the camera, follow these steps to
disassemble the camera.
1. Use the provided torx wrench to loosen (but not remove) the
3 screws that securing the dome cover to remove the cover.
For non-IR model only: remove the inner liner by gently
pulling it free from the camera middle casing.
2. Remove the 3 screws to remove the middle casing from the
back casing.
Non-IR Dome Camera
IR Dome Camera
3.2 Mounting the Camera
3.2.1 Flush Mount
1. Attach the provided "Indoor Use" guide pattern to the
mounting location.
2. Drill three holes on the installation surface and insert
provided anchors into the pre-drilled holes.
